ST8002 with an E127
|
08-26-16, 12:37 PM
Post: #1
|
|||
|
|||
ST8002 with an E127
Two questions, I installed a new e127 on a new to me 2007 Legacy 32 Down-east Express.
I updated the Lighthouse software and created a route using the auto routing. I opened up the route and hit follow route, and i don't know how to engage the autopilot to follow the route. My prior boat had e97s and a p70 installed at the same time in 2013 so it was all same vintage electronics. The AP is on the network, as i can see the rudder position on the e127, which also begs another question, which is, can I place the rudder indicator permanently on the e127 display as a header or footer so it always displays, it is difficult to see on the AP head. Thanks in advance! Mike Mike Rocheleau "True North" 2007 Legacy 32 Downeast Express Cummins QSB 5.9 420HP Island Cove Marina Old Saybrook, CT |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
ST8002 with an E127 - Mike Rocheleau - 08-26-16 12:37 PM
RE: ST8002 with an E127 - Chuck - Raymarine - Moderator - 08-26-16, 03:19 PM
RE: ST8002 with an E127 - Mike Rocheleau - 08-27-16, 07:31 AM
RE: ST8002 with an E127 - Chuck - Raymarine - Moderator - 08-29-16, 09:49 AM
|
User(s) browsing this thread: 1 Guest(s)