St4000 - wiring and voltage drop
|
09-01-16, 07:51 AM
(This post was last modified: 09-01-16 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #8
|
|||
|
|||
RE: St4000 - wiring and voltage drop
James,
The sensed deviation is too high. Before relocating the fluxgate compass, it is recommended that the fluxgate compass be tested per the FAQ found herehere and replaced if found to be faulty. Should the test not indicate a faulty fluxgate compass, then the fluxgate compass should relocated further from the engine block and alternator. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
St4000 - wiring and voltage drop - Bikerbob - 08-29-16, 12:40 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 08-29-16, 02:42 PM
RE: St4000 - wiring and voltage drop - Bikerbob - 08-29-16, 04:27 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 08-30-16, 08:08 AM
RE: St4000 - wiring and voltage drop - Bikerbob - 08-30-16, 05:30 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 08-31-16, 10:22 AM
RE: St4000 - wiring and voltage drop - Bikerbob - 08-31-16, 11:19 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 09-01-16 07:51 AM
|
User(s) browsing this thread: 1 Guest(s)