ST60 wind display

[Mark - Raymarine - Moderator]

Hi Steve,
Yes, the i60 wind instrument is a compatible replacement for the ST60 display.
That being said, what you are stating is a little strange, whereas the master ST60 wind instrument is responsible for putting the information out on the Seatalk bus, one would expect to see the same values on a repeater, such as the ST60 graphic display. So if the ST60 wind displays 0.0 for speed, that is what you should see on the Graphic, unless perhaps you have one or the other set to true rather than apparent, and you have speed through the water, then I could see otherwise.
What happens when you set both displays for apparent wind speed?