Raymarine forum / Raymarine Forums / General Discussions v / Seatalk Fail / SmartPilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk Fail / SmartPilot
09-14-16, 12:04 AM (This post was last modified: 09-14-16 08:32 AM by Chuck - Raymarine - Moderator.)
Post: #5
tondelayo_29 Offline
Junior Member
**
 		Posts: 7
Joined: Sep 2016
Reputation: 0
RE: Seatalk Fail / SmartPilot
Yes and Thank you, I followed your link this morning and made made a copy of the page. However for my own testing information I am trying to find what the voltage should be (if any) at the terminal connection on the PCB. Is this proprietary information? I'm hoping that someone that has a Smart Pilot can turn it on and touch the blue wire terminal connection and tell me what the reading is. Red Blue & Yellow test appox 4.75V and the blue is negligible at best.

All the fluxgate testing deals with ohming out the connections and I will get to that next trip to the boat. I would like to know what the voltage is at the terminal.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Seatalk Fail / SmartPilot - tondelayo_29 - 09-14-16 12:04 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication