The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Upgrading MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading MFD
09-16-16, 12:58 PM
Post: #1
seeray96 Offline
Junior Member
**
 		Posts: 46
Joined: Jun 2016
Reputation: 0
Upgrading MFD
I'm considering upgrading from a Classic E-120 to either an eS97 or eS127. Rather than completely rewiring the helm, I'd like to have the option of doing the wotk in phases. Currently my RS130 is connected to the E120 via a SeaTalkng Converter. The only other connection to the E120 is from the transducer thru the DSM300 via SeaTalkHS.
The other instruments (ST60, Raypilot650, SmartPilot S3, Triducer)) are on a second basic network, with no connection to the E120. Ultimately, I'd put them (or their replacements) on the SeaTalkng network.
Could I connect the current transducer (Airmar B60-200-Ray 50/200) directly to the new MFD (via E85001), and get rid of the DSM300?
I have a feeling that this will be a bit more complicated than flush mounting the new MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrading MFD - seeray96 - 09-16-16 12:58 PM
RE: Upgrading MFD - rvaupel23 - 01-18-17, 09:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication