Upgrading MFD
|
09-16-16, 01:31 PM
Post: #2
|
|||
|
|||
RE: Upgrading MFD
Welcome to the Raymarine Forum seeray96,
To interface an eS97 or eS127 MFD to the RS130, the SeaTalk to SeaTalkng Converter would be replaced with an A06064 SeaTalkng 5-Way Connector. The SeaTalkng port of the MFD would then be joined to the SeaTalkng 5-Way Connector via an appropriate length of SeaTalkng Spur Cable. The currently installed power cable will need to be replaced with the Power/NMEA 0183/Video Input Cable supplied with the eS-Series MFD. Finally, the SeaTalk Cable which had been connecting the DSM to the E-Series Classic MFD will be adapted (w/A80160 SeaTalkhs (F) to RayNet (F) Adapter) to mate to the eS-Series MFD's Ethernet Network socket. There's no need to replace the DSM unless you have been experiencing issues with it. If so, then the transducer may be unplugged from the DSM and adapted (w/E66066 Transducer Adapter) to mate to the eSx7 MFD's Transducer socket. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Upgrading MFD - seeray96 - 09-16-16, 12:58 PM
RE: Upgrading MFD - Chuck - Raymarine - Moderator - 09-16-16 01:31 PM
RE: Upgrading MFD - rvaupel23 - 01-18-17, 09:17 PM
RE: Upgrading MFD - Chuck - Raymarine - Moderator - 01-19-17, 09:16 AM
|
User(s) browsing this thread: 1 Guest(s)