Raymarine forum / Raymarine Forums / Instruments v / Raymarine Transducer compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raymarine Transducer compatibility
11-03-16, 01:47 PM
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Raymarine Transducer compatibility
Sergio,

C-Series Classic MFDs do not support Ethernet (SeaTalkhs) communications as do the a/c/e/eS/gS-Series MFDs. The C-Series Classic MFDs were designed to communicate with the DSM via hsb2 communications rather than Ethernet communications. While the DSM has both Ethernet (SeaTalkhs) and hsb2 communications ports, it cannot simultaneously support both Ethernet and hsb2 communications. As such, a C-Series Classic MFD and an a/c/e/eS/gS-Series MFD should not be simultaneously interfaced to a DSM.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Raymarine Transducer compatibility - Chuck - Raymarine - Moderator - 11-03-16 01:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication