New Electronics

[Chuck - Raymarine - Moderator]

Bob,

Like other SeaTalkng / NMEA 2000 devices, the EV-1 Sensor Core is designed to be interfaced to the Data Master MFD and powered via a powered and properly terminated SeaTalkng backbone. Raymarine MFD's are neither designed to be powered by nor supply power to a SeaTalkng / NMEA 2000 backbone, making it necessary to power the backbone from a switched 12VDC power circuit. A simple backbone may be constructed from the following components:

- A06064 SeaTalkng 5-Way Connector
- A06031 SeaTalkng Termination Plugs x 2
- A06049 SeaTalkng Power Cable
- a pair of SeaTalkng Spur Cables of appropriate length to interface the a/c/e/eS/gS-Series MFD and EV-1 Sensor Core to the SeaTalkng 5-Way Connector.