T122 not registering on MFD
|
03-03-17, 04:42 PM
(This post was last modified: 03-03-17 04:43 PM by Chuck - Raymarine - Moderator.)
Post: #6
|
|||
|
|||
RE: T122 not registering on MFD
Peter,
Per our conversation, it is recommended that the T122 be charged for 48 to 72 hours. After charging the T122, it will need to be "Auto Networked" with the T120 Display. To Auto Network (see the yellow Auto Networking guide packaged with the Tacktic product): 1. Position the T122 within 12" of the T120 Display 2. Press the T120 Displays's circle button and hold pressed for 2 seconds 3. Press the T120 Displays's down arrow key to display OPTIONS 4. Press the T120 Displays's right arrow key to display AUTONETWORKING 5. Press and release the T120 Displays's circle key ... the T120 display will report UNIT ADDED when the devices have been networked. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
T122 not registering on MFD - pwolfpwolf - 10-31-16, 06:44 AM
RE: T122 not registering on MFD - Chuck - Raymarine - Moderator - 10-31-16, 04:00 PM
RE: T122 not registering on MFD - pwolfpwolf - 03-01-17, 02:43 PM
RE: T122 not registering on MFD - Chuck - Raymarine - Moderator - 03-01-17, 02:46 PM
RE: T122 not registering on MFD - pwolfpwolf - 03-01-17, 02:51 PM
RE: T122 not registering on MFD - Chuck - Raymarine - Moderator - 03-03-17 04:42 PM
RE: T122 not registering on MFD - pwolfpwolf - 03-05-17, 01:48 PM
RE: T122 not registering on MFD - Chuck - Raymarine - Moderator - 03-06-17, 12:15 PM
|
User(s) browsing this thread: 1 Guest(s)