European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Try to set the Data Master
|
|
11-03-16, 06:25 PM
Post: #2
|
|||
|
|||
|
RE: Try to set the Data Master
Welcome to the Raymarine Forum KK_41,
The reported issue may occur due to any of the following: - the equipment not be interfaced correctly ... with respect to Data Mastership in conjunction with Raymarine MFDs, the MFDs must be interfaced via Ethernet communications. The Data Master alone will typically be interfaced to the SeaTalkng backbone. All system data (except for NTSC/PAL analog video) will be shared between the MFDs via the Ethernet network. - the Network Switch (if one has been installed) has not been powered. Network Switches are designed to be powered by a switched 12/24 VDC power circuit - there is an issue with one of the Ethernet networking components ... Please click here to view a FAQ addressing this subject. - there is an issue with the Ethernet communications circuitry of one of the MFDs |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Try to set the Data Master - KK_41 - 11-03-16, 03:10 PM
RE: Try to set the Data Master - Chuck - Raymarine - Moderator - 11-03-16 06:25 PM
RE: Try to set the Data Master - KK_41 - 11-07-16, 06:09 AM
RE: Try to set the Data Master - Chuck - Raymarine - Moderator - 11-07-16, 09:48 AM
RE: Try to set the Data Master - KK_41 - 11-07-16, 10:07 AM
RE: Try to set the Data Master - Chuck - Raymarine - Moderator - 11-09-16, 04:02 PM
|
User(s) browsing this thread: 1 Guest(s)