Raymarine forum / Raymarine Forums / Product Selection Assistance v / Upgrades to Existing Raymarine System on B35.5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrades to Existing Raymarine System on B35.5
11-25-16, 03:54 PM
Post: #5
Tnauck Offline
Junior Member
**
 		Posts: 15
Joined: Mar 2016
Reputation: 0
RE: Upgrades to Existing Raymarine System on B35.5
The STNG system that the p70 controller and SPX-5 course computer are connected to is powered by the SPX-5, which is connected to the DC breaker panel. I plan to disconnect the STNG power cable from this system when I connect this system to the instrument system with a backbone cable. The instrument system will then provide the power to the expanded STNG system. Do I also need to disconnect the SPX-5 from the DC breaker panel, or does it need to remain connected to provide power to the wheel drive unit which is also connected to the SPX-5?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Upgrades to Existing Raymarine System on B35.5 - Tnauck - 11-25-16 03:54 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication