Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA2000 and STNG
11-21-16, 09:54 AM
Post: #2
RE: NMEA2000 and STNG
Welcome to the Raymarine Forum Jerry,

Raymarine's SeaTalkng backbone is based upon the same physical layer specified by the NMEA 2000 specification. When initially introduced, marine electronics manufacturers were free to develop their own NMEA 2000 networking components ... and many, such as Raymarine did, while including adapters for NMEA 2000 devices and networking components which settled upon DeviceNet components (ex. Micro-C, etc.). As you have suggested, the marine electronics industry seems to be migrating more and more toward DeviceNet networking components. However, as the SeaTalk to SeaTalkng Converter features SeaTalkng backbone sockets rather than DeviceNet Micro-C sockets, it will be necessary to install field installable DeviceNet Micro-C plugs to a SeaTalkng backbone cable to permit it to be mated to a NMEA 2000 backbone which has been constructed from DeviceNet components. Please click here to view a FAQ addressing this subject. A feature request has been logged to introduce a SeaTalkng backbone to DeviceNet Micro-C (M) adapter and a SeaTalkng backbone to DeviceNet Micro-C (M) adapter to support needs such as that which you have described.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA2000 and STNG - JerryGeorge - 11-18-16, 08:40 PM
RE: NMEA2000 and STNG - Chuck - Raymarine - Moderator - 11-21-16 09:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)