The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / NMEA input to a78 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA input to a78 MFD
11-19-16, 03:35 PM
Post: #1
charlie98117 Offline
Junior Member
**
 		Posts: 17
Joined: May 2016
Reputation: 0
NMEA input to a78 MFD
Hi, I'm back. To recap I have a Standard Horizon GX2200 with AIS output via NMEA 0183 at 38,400 baud. I bought the Actisense NMEA-0183 to STNG converter and I'm having problems making the connection. The Lighthouse documentation says I need to set the baud rate to 38,400 at homescreen>Setup>System Settings>NMEA Setup. I have no option for NMEA Setup under System Settings. Does the a78 always communicate at 38,400? Is the system setting somewhere else?

The LEDs on the Actisense say there is signal received from both sides. Am I missing something?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA input to a78 MFD - charlie98117 - 11-19-16 03:35 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication