The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Problem with s1g and st8001

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem with s1g and st8001
12-05-16, 10:59 PM
Post: #1
Mongoose969 Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2016
Reputation: 0
Problem with s1g and st8001
I just acquired a 2004 boat with a smartpilot, the boat will turn hard stbd When the auto is pressed. Left Rudder indicates on the st8001, I replaced the flux gate compass twice thinking the other was bad. The reading will stop at certain degrees then will continue but it's missing large portions on the readings, 25-26deg deviation when calibrated. Should I reset the smartpilot or does it needs to be repair? Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Problem with s1g and st8001 - Mongoose969 - 12-05-16 10:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication