Raymarine forum / Raymarine Forums / Instruments v / Wind transducer through iTC-5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wind transducer through iTC-5
12-13-16, 03:06 PM (This post was last modified: 12-13-16 03:24 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Wind transducer through iTC-5
Welcome to the Raymarine Forum Tim,

Should the wind transducer be interfaced to the iTC-5, then it will need to be calibrated by an i70 MFID (Master). Should an i60 Wind Instrument be added to the system and the wind transducer remain interfaced to the iTC-5, then the i60 Wind Instrument and other i70 MFIDs (Repeaters) will repeat wind data from the Master i70 MFID via the SeaTalkng backbone. We have not been receiving complaints of significant latency issues concerning wind data reported by these instruments when installed in this manner.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Wind transducer through iTC-5 - TKP62 - 12-06-16, 02:55 PM
RE: Wind transducer through iTC-5 - Chuck - Raymarine - Moderator - 12-13-16 03:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication