Raymarine forum / Raymarine Forums / Multifunction Displays v / AIS shuts down when you use GO TO

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS shuts down when you use GO TO
12-24-16, 09:50 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS shuts down when you use GO TO
Welcome to the Raymarine Forum gkastendike,

Which model of Standard Horizon VHF radio has been interfaced to the system and how has the VHF radio been interfaced to the system?

How has the AIS transceiver been interfaced to the system (NMEA 0183, NMEA 2000, or both)?

When the SH VHF radio has been switched OFF and a GoTo is commanded, does the the MFD continue to have the ability to display AIS target data?

When the AIS transceiver has been disconnected from the system and a GoTo is commanded, does the VHF radio continue to receive GPS data?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: AIS shuts down when you use GO TO - Chuck - Raymarine - Moderator - 12-24-16 09:50 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication