Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Seatalk to Garmin 740s?
01-09-17, 02:22 PM (This post was last modified: 01-09-17 02:23 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Seatalk to Garmin 740s?
Welcome to the Raymarine Forum John,

While the Garmin 740s appears to not have a NMEA 2000 communications interface, it appears to have a NMEA 0183 communications interface, permitting data to be transmitted to other devices. It is recommended that the depth transducer be disconnected from the ST40 Bidata's transducer terminals. The SeaTalk bus may then be disconnected from its present source of power and then interfaced to the SeaTalk socket of a SeaTalk to SeaTalkng Converter Kit. A NMEA 0183 to SeaTalkng / NMEA 2000 data bridging device (ex. Actisense NGW-1-ISO-STNG, etc.) may then be used to interface the NMEA 0183 output port of the Garmin 740s as a spur the SeaTalk to SeaTalkng Converter. Please click here to view a FAQ addressing interfacing SeaTalk devices to a SeaTalk to SeaTalkng Converter.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Seatalk to Garmin 740s? - duetto - 01-08-17, 03:27 PM
RE: Seatalk to Garmin 740s? - Chuck - Raymarine - Moderator - 01-09-17 02:22 PM
RE: Seatalk to Garmin 740s? - skipmac - 07-03-17, 03:10 PM
RE: Seatalk to Garmin 740s? - skipmac - 07-05-17, 08:22 AM
RE: Seatalk to Garmin 740s? - skipmac - 01-27-18, 10:11 AM
RE: Seatalk to Garmin 740s? - skipmac - 01-29-18, 10:42 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)