The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Constructing a simple SeaTalkng / NMEA 2000 backbone?
01-17-17, 01:46 PM (This post was last modified: 03-25-19 08:43 AM by Chuck - Raymarine - Moderator.)
Post: #1
Constructing a simple SeaTalkng / NMEA 2000 backbone?
Constructing a simple SeaTalkng / NMEA 2000 backbone

A simple backbone to interface two devices having a SeaTalkng communications interface may be constructed from the following components:

- A06064 SeaTalkng 5-Way Connector
- A06031 SeaTalkng Termination Plugs x 2
- A06049 SeaTalkng Power Cable (to be powered from a switched 12VDC power circuit)
- a pair of SeaTalkng Spur Cables of appropriate length to interface the two devices having SeaTalkng communications interfaces.

Note: Raymarine has recently begun to introduce products in which their SeaTalkng / NMEA 2000 communications interface utilizes a DeviceNet (M) socket (Axiom / Axiom Pro MFDs) rather than a SeaTalkng spur socket (ex. Ray50/60/70/250 VHF radios, i50/i60/i70 instruments, p70S/p70RS, AIS350/650, etc.). Such devices may be interfaced to one of the SeaTalkng / NMEA 2000 backbone's spur sockets by using an A06045 SeaTalkng to DeviceNet (F) Adapter Cable.

The diagram below shows a simple SeaTalkng / NMEA 2000 backbone.

[Image: attachment.php?aid=90]

Additional spur sockets may be added to this backbone by using appropriate lengths of SeaTalkng Backbone cable to daisy chain additional SeaTalkng 5-Way Connectors and/or A06028 SeaTalkng T-Pieces to the above listed SeaTalkng 5-Way Connector. To learn more about SeaTalkng / NMEA 2000 communications click here. The full list of SeaTalkng networking components may be found here. Please click here to view a FAQ addressing how to interface a NMEA 2000 device having a DeviceNet Micro-C (M) plug to a SeaTalkng backbone.

[Image: SeaTalkng%20new%20network%20diagram.jpg]


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Constructing a simple SeaTalkng / NMEA 2000 backbone? - Chuck - Raymarine - Moderator - 01-17-17 01:46 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)