The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / S1 smart pilot -> NMEA 2000 question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
S1 smart pilot -> NMEA 2000 question
02-27-16, 10:42 AM
Post: #1
cchapman Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2016
Reputation: 0
S1 smart pilot -> NMEA 2000 question
Hi, I am working on upgrading my Seatalk1 network to STng and have a question about NMEA 2000 compatibility.

Diagram attached with a proposed network. The potential issue I see is with the smart pilot (S1 + ST6001) integration on an STng backbone when there are NMEA 2000 devices on the STng backbone. The Raymarine guide says:
“Limitations when SeaTalk(1) products are connected. If SeaTalkng and SeaTalk(1) products are used together, do NOT connect an NMEA2000 backbone, as this product combination could compromise the integrity of the NMEA2000 system.”
I think what this means is if you have an NMEA2000 backbone (not an STng backbone as depicted) you can’t add ST1->STng devices. But maybe i am reading the incorrectly. Can you please provide feedback/direction on how to set up the STng backbone?
Thanks, Chris


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
S1 smart pilot -> NMEA 2000 question - cchapman - 02-27-16 10:42 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication