ST-60 Speedlog issues

[skipgundlach]

When I took it apart for testing continuity, one of the legs came off with no resistance.

I could not get it to measure on the leads (corrosion?) but after firmly remounting those legs, it registered the transducer speed.

It's bright out so I've not had a chance to check the seatalk bus, but the remote is 3-wire and works in every other mode, so I presume that part is proper.

The other, I traded seatalk ports and made sure it was firmly seated. That may also cure the light-adjustment from the remote.

Thanks for the method.

L8R

Skip