e7 stuck in initialization mode?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum kalakai,

It is recommended that you remove any microSD memory cards from the MFD's memory card reader, switch OFF power to the MFD, wait one minute, and then switch power ON to the MFD. Should the MFD not boot normally, then it is recommended that WPT button be pressed to reset the MFD. Should doing so not permit the MFD to start up correctly, then it would be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced. However, should the MFD start up properly after having removed the chart card or having Reset the MFD, then it would be recommended that the microsD memory cards be inspected with a computer to ensure that the do not contain any software update files within their root level directories. Should there not be any software update files stored within the root level directories of the microSD memory card, and the microSD chart cards contain chart data, then it is recommended that the chart data stored on these chart cards be updated.