ST60 Tridata interfaced C80 multifunctiondisplay

[Chuck - Raymarine - Moderator]

Sergio,

While there may be some latency in the data reported between the MFD and an instrument repeating data, I don't recall having ever run across the reported symptom. Should the vessel be tied dockside and the symptom not be able to be reproduced, then the symptom would appear to be associated with such latency. However, should the problem persist when tied dockside, then it would be recommended that
- you verify that no temperature offset has been configured within the ST60 Tridata Instrument ... see the [url=https://raymarine.app.box.com/s/w7dp1h5hwi1f3fmda4x1/1/402191901/3273522439/1
]ST60 Tridata display's Owner's manual[/url] for the command sequence
- you verify that the Tridata has been configured as a Speed/Temp Repeater ... setting performed the Intermediate Cal options ... see the ST60 Tridata display's Owner's manual for the command sequence
- the MFD has been updated with the latest available Raymarine product software update

Should the problem persist thereafter, then the symptom may be the result of another NMEA 0183, NMEA 2000, or SeaTalk source of water temperature data within the system ... for further troubleshooting, a complete list of all of the marine electronics within the system and an indication of how these items have been interfaced within the system (ex. system diagram ... hand drawn will suffice) would be required.