RE: Replacing all electronics
|
02-08-17, 01:51 PM
(This post was last modified: 02-08-17 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: RE: Replacing all electronics
Chuck,
Thanks for the reply. If I understand correctly I should be able to add a T connector to the backbone then plug in a spur cable (A645) from the NMEA2000 output of the Actisense unit to the new T. I do not need another 5 way connector unless I just want to have additional inputs available for future use. Is that correct? Randy |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
RE: Replacing all electronics - wrandy - 02-06-17, 03:53 PM
RE: RE: Replacing all electronics - Chuck - Raymarine - Moderator - 02-06-17, 04:47 PM
RE: RE: Replacing all electronics - wrandy - 02-08-17 01:51 PM
RE: RE: Replacing all electronics - Chuck - Raymarine - Moderator - 02-08-17, 03:57 PM
|
User(s) browsing this thread: 1 Guest(s)