Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer
03-03-17, 05:01 PM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Interface EV-100 Sail to Raymarine wind transducer
Justin,

The iTC-5 would only have applicability if the system included an i70/i70S MFID. In such cases, the wind transducer would be interfaced to the iTC-5. In this case, the i60 Wind instrument would simply be interfaced as a spur to the backbone and the wind transducer would be connected to the transducer terminals located on the back side of the instrument.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interface EV-100 Sail to Raymarine wind transducer - Chuck - Raymarine - Moderator - 03-03-17 05:01 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication