Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
temperature transducer
03-21-17, 03:10 PM (This post was last modified: 03-27-17 07:53 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: temperature transducer
Welcome to the Raymarine Forum John,

The HT200 is a third party NMEA 2000 temperature sensor. When the HT200, the MFD, and the i70 are each interfaced as spurs to a powered and properly terminated SeaTalkng backbone, then the MFD and the i70 would each be able to repeat temperature data from the HT200 as long as the system did not feature any other sea temperature transducers. The i70 is not designed to support temperature calibration or alarms associated with third party temperature sensors.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
temperature transducer - dr john - 03-19-17, 07:42 PM
RE: temperature transducer - Chuck - Raymarine - Moderator - 03-21-17 03:10 PM
RE: temperature transducer - dr john - 03-26-17, 08:06 PM
RE: temperature transducer - dr john - 03-28-17, 08:29 PM
RE: temperature transducer - dr john - 03-30-17, 03:30 PM
RE: temperature transducer - dr john - 03-31-17, 02:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)