The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Lost depth function on RL70Cplus

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lost depth function on RL70Cplus
03-24-17, 09:21 AM
Post: #1
14Bayview Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2017
Reputation: 0
Lost depth function on RL70Cplus
I have a 2004 Parker with a RL70Cplus display with DSM250 sounder module and GPS and radar functions. The boat has been drydocked since Sandy but now repairs are done. When I turned on display there was no depth function selection. The GPS and radar work fine. I have reset the RL70C and have played with the DSM to no avail. I restarted the DSM module and it has a green light indicating all is well. When I first looked at the module one of the cables was off, I believe the hsb cable but they are all plugged in and I get a green light. Any suggestions where the problem may lie?? Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Lost depth function on RL70Cplus - 14Bayview - 03-24-17 09:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication