Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST70 with SPX5
03-28-17, 09:55 AM
Post: #2
RE: ST70 with SPX5
Welcome to the Raymarine Forum gustavoiz,

When using a SPX autopilot course computer in conjunction with a ST70 autopilot control head, it is recommended that these devices be interfaced to one another via a powered and properly terminated SeaTalkng backbone. Please click here to view a FAQ addressing how a simple backbone may be constructed. As the SPX autopilot course computers had limited SeaTalk to SeaTalkng data bridging capabilities, it is recommended that a SeaTalk to SeaTalkng Converter (updated with the latest available Raymarine product software updates) be added to the SeaTalkng backbone and that the SeaTalk bus linking the ST60 instrument(s) (up to 5 per SeaTalk to SeaTalkng Converter permitted) be interfaced to the SeaTalk socket (yellow) of the SeaTalk to SeaTalkng Converter. It is further recommended that you ensure that the SPX autopilot course computer and the ST70 autopilot control head each also be updated with the latest available Raymarine product software updates.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
ST70 with SPX5 - gustavoiz - 03-27-17, 06:06 PM
RE: ST70 with SPX5 - Chuck - Raymarine - Moderator - 03-28-17 09:55 AM
RE: ST70 with SPX5 - gustavoiz - 03-29-17, 03:49 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)