Raymarine forum / Raymarine Forums / Radar v / E120 Classic and Rd424D.. Not found

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 Classic and Rd424D.. Not found
04-03-17, 12:19 PM (This post was last modified: 04-03-17 12:21 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E120 Classic and Rd424D.. Not found
Welcome to the Raymarine Forum Oregoncme,

Please click here to view a FAQ addressing this subject. It is recommended that all Digital/HD Digital Radomes and HD/Super HD Open Arrays be powered via a dedicated switch or breaker. In systems such as this, it may be advisable that the radome not be powered ON until the MFDs have completed boot-up initialization. Should cycling power to the radome alone within this system not then permit communications, then it would be recommended that the radome be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: E120 Classic and Rd424D.. Not found - Chuck - Raymarine - Moderator - 04-03-17 12:19 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication