Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA 0183 to 2000 Conversion & Axiom
04-11-17, 10:15 AM (This post was last modified: 04-11-17 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: NMEA 0183 to 2000 Conversion & Axiom
Thank-you for your detailed response.

I will proceed with the NGW-1 installation.

The output of the Raystar GPS receiver is connected to the SeaTalk connector on the Master E120 unit (Display #1). Once the NGW-1 is installed and the NMEA 0183 connection on the master unit is no longer in use, can I change the baud rate of the NMEA 0183 to 38,400 on that unit and connect it to the AIS without messing up the GPS interface?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: NMEA 0183 to 2000 Conversion & Axiom - jkspain - 04-11-17 10:15 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)