The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Splice Quantum Data Cable
04-19-17, 08:08 AM
Post: #1
Splice Quantum Data Cable
I am currently installing a new Quantum Radar (T70243) on my boat with an Axiom 9 with 3D RealVision (E70367). Although the unit provides integration via WiFi, I prefer to install it using the included data cable. After a week of trying to snake the data cable through the boat, I had to cut the connector off. I was then able to snake the cable through the remaining distance to the install location.

I have experience with CAT 5 cable and RJ45 connectors and it appears that the data cable is the same as CAT 5 cable. I was trying to determine the best way to splice the cables together and was hoping you could help me answer the following questions:

1. Can I crimp a standard RJ45 connector to the end of the cable and then use the RayNet (F) to RJ45 (F) Adaptor (Part #A80247)

2. If I crimp a RJ45 connector to the cable, do I use a typical CAT-5 B diagram?

3. Am I better off using a standard punch junction board to make the connection and then seal it?

Thanks for your help and I can't wait to try out my new electronics
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Splice Quantum Data Cable - capecodboater - 04-19-17 08:08 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)