The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Type I pump install ev150

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Type I pump install ev150
04-24-17, 10:09 AM
Post: #1
rltrbill Offline
Member
***
 		Posts: 75
Joined: Feb 2016
Reputation: 0
Type I pump install ev150
I just received my new ev150. Was going over the installation for the Type I pump and my helm (sea star HH5261) only has the P & S hoses connected. There is no reservoir connected. The instructions say it must be connected to the pump. So what now? It appears the "R" ports are capped......

Also, can the pump be mounted at/near the helm? It is the ideal spot for the installation for hose routing and connections to the existing electronics. I know the instructions say "close tot he ram" but it is not ideal and would make this extremely difficult and the pump would have to be mounted in the bilge.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Type I pump install ev150 - rltrbill - 04-24-17 10:09 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication