Transducer cable length

[Chuck - Raymarine - Moderator]

Josh,

As indicated by the referenced FAQ, Raymarine transducers feature a transducer tag to permit positive identification of the specific model of P319 transducer. The transducer's pin arrangement appears to be that of the A80171, a transducer which is designed to be directly mated to the 600W 50/200kHz Transducer socket of a ax7/cx7/e7D/ex7/eSx7 MFD. Should this be the case, then the transducer's cable would need to be adapted (part #A80344) to be mated to be mated to the CP370.

That said, without the information printed on the transducer's tag, we would be unable to positively identify the transducer. You may want to consider contacting the yard who ordered/installed the transducer to seek verification of the specific part number ordered to in turn permit positive identification of the transducer. Should the transducer have been produced by Airmar, Inc., then Airmar may be able to provide further assistance with positive identification of the transducer and make recommendations on adaptation should the transducer not be that specified within the opening paragraph of this post.