RD418HD Power Data Cable

[jalexand]

Hello,

I have a new RD418HD and an A95 that I'm going to be installing this weekend. In reading the manual for the radar it says to keep the power run to be as short as possible. On my Jeanneau the A95 is going to be installed in the Helm station in front of the wheel. But to get there I have to go through a cable locker below the backs stay where the cable comes into the boat. But this is also where I will be bringing a 14 gauge three stand wire from the distribution panel. Does it make sense to split the data and power cable back to this locker or just run both wires to helm and splice the power there.

I hope that makes sense.

Thanks,
Jason