Raymarine forum / Raymarine Forums / Fishfinders v / DSM 300 Issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM 300 Issues
06-27-17, 01:54 PM
Post: #15
seeray96 Offline
Junior Member
**
 		Posts: 46
Joined: Jun 2016
Reputation: 0
RE: DSM 300 Issues
One more comment on DSM300-
I mentioned earlier that while the DSM seemed non-functional, with flashing orange LED and no depth reading on the E120, the E120 display showed the boat icon with transducer waves eminating from under the boat. When I disconnected the power cable to verify DC, it measured +12.9 V, and of course the boat icon stopped showing transducer output and the orange led went blank, of course. Then, after reconnecting the 12VDC cable, the boat icon showed transducer output again. Even though the pulsing orange led was lit 90% of the time, the other 10% resulted in a green led with depth readings.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM 300 Issues - seeray96 - 06-06-17, 01:11 PM
RE: DSM 300 Issues - seeray96 - 06-13-17, 02:51 PM
RE: DSM 300 Issues - seeray96 - 06-14-17, 10:02 AM
RE: DSM 300 Issues - seeray96 - 06-15-17, 08:46 PM
RE: DSM 300 Issues - seeray96 - 06-19-17, 08:40 PM
RE: DSM 300 Issues - seeray96 - 06-20-17, 09:47 AM
RE: DSM 300 Issues - seeray96 - 06-20-17, 12:08 PM
RE: DSM 300 Issues - seeray96 - 06-27-17 01:54 PM
RE: DSM 300 Issues - seeray96 - 06-28-17, 12:03 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 12:50 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 03:12 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication