The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60 Wind - Suspect wire damage
06-24-17, 10:57 AM
Post: #1
ST60 Wind - Suspect wire damage
I have reason to suspect wire damage in the mast. However I am confused by the readings I get:
Instrument powers up displays --- and straight up arrow.
When all wires are connected I have 8V across all 4 wires from GND
(does this indicate continuity to the masthead and back?)
When only GND and Red connected, I have 8V from
GND to Red and also 8V on the return line from the masthead on Blue Green Yellow.
So I am confused as to what I'm seeing or, coincidentally with the extreme street on the wires did the transducer fail.?
Anyway, thanks for any input!
Michael
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST60 Wind - Suspect wire damage - mmichaelbrown - 06-24-17 10:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)