Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
st50+ depth replacement compatibility
07-19-17, 12:46 PM
Post: #2
RE: st50+ depth replacement compatibility
Welcome to the Raymarine Forum Lazybones,

Q1. Is there a transducer that I can use to replace the failing one that would work with the existing ST50+ head? If so which one?
A1. Yes. The ST50+ Depth Instrument may be used with any of the analog Depth, Depth/Temp, or Depth/Temp/Speed Instrument Transducers found here. Typically, a ST50+ Depth Instrument would be interfaced to a M78713-PZ-A P19 Instrument Depth Transducer or a M78717 B17 Instrument Depth Transducer.

Q2. if not, which transducer (current one is in hull) would I use for the ES127?
A2. See the response to Q1.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: st50+ depth replacement compatibility - Chuck - Raymarine - Moderator - 07-19-17 12:46 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)