Dead p70

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Kyle,

Based upon the symptoms reported, it does not appear that the P70 is receiving power. You may want to try disconnecting its spur cable from both it SeaTalkng socket and from the backbone's spur socket. After doing so, plug the cable back into both the i70 and the SeaTalkng spur socket and rotate each socket's locking ring into the locked position. Should the p70 fail to then power ON, then it would appear to have suffered a failure necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.