Integrating st60+ wind to a STng environment

[Chuck - Raymarine - Moderator]

kechikan,

Q1. Can I connect the wind transducer to the ITC-5, and on the other end, using the kit, connected the ST60+ wind display to the STng backbone, be able to have the wind readings?
A1. Should the system include an i70/i70S MFID and should it be interfaced as a spur to the SeaTalkng backbone, then the i70/i70S MFID will be used to calibrate the wind transducer. Should the ST60+ Wind Instrument Display then be interfaced to the SeaTalk socket of the SeaTalk to SeaTalkng Converter and shoudl the ST60+ Wind Instrument be configured as a repeater, then it will repeat wind data.

Q2. If the way is to keep the transducer connected directly to the display, and use the kit to connect it to the Stng backbone.
A2. See the response to Q1.

A3. Will I have the speed readings on the ST60+?
A3. If you are referring to wind speed data, then the answer would be yes.

Q4. Will the wind information be available for the auto pilot?
A4. If interfaced in the manner specified within the response to Q1, then the autopilot will indeed have access to wind data.