Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS and older MFD's
10-05-17, 10:54 AM
Post: #2
RE: AIS and older MFD's
Welcome to the Raymarine Forum

Q. In connecting to one MFD will the AIS signals automatically show on the second MFD or do I need to connect directly to both and is there adequate plugs for completing the connection with everything else connected?
A. Should the MFD's be interfaced to one another via a SeaTalkhs (Ethernet) network, then these MFDs are designed to share all data and system resources (exception: NTSC/PAL camera video) with one another via this single interface connection between the MFDs. In such installations, the AIS receiver/transceiver may be interfaced to the NMEA 0183 port of either, but not both, E-Series MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
AIS and older MFD's - Eirinnrose - 10-05-17, 09:59 AM
RE: AIS and older MFD's - Chuck - Raymarine - Moderator - 10-05-17 10:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)