The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom/Quantum
10-22-17, 12:28 PM
Post: #1
Axiom/Quantum
I’m contemplating replacing my E80 Classic/radar installation with a pair of Axioms and a Quantum. I’ve reviewed the latest Lighthouse manual for Axiom (v3.2) and also played with some of the hardware at the local dealer (though that was running v3.0 software).

I have some additional questions the dealer couldn’t answer so I went to the Annapolis Powerboat show to talk to the Raymarine folks. Unfortunately they weren’t there — I guess RM only attended the Sailboat show this year.

And so I’m directing my questions here. Thanks for your patience.

I’ve attached drawings of my current network and proposed Axiom-based configuration.

Q1: Axiom units are sold w/o charts or with LSA, NAG, or CSA charts. Are there any difference in the Axiom HW between the offerings? Assuming no, can I buy any of the models and swap in charts from different vendors down the road?

Q2: If purchasing an Axiom with a chart, does the price include any chart upgrades? For example, 1-year of Navionics Freshest Data when buying a NAG configuration?

Q3: Is the NAG option the same card on the 7, 9, and 12 versions? I see the incremental price for adding the NAG option to these units is different ($50 vs. $100 vs. $200)

Q4: With 2 Axiom units, is it correct that only one must be populated with a chart card, and that unit (the Data master) can share the charts just as my E80s can?

Q5: With 2 Axiom units one must be the Data master. In my configuration it will be difficult to reach the SD card slot on the Data master. Can the slot on the slave be used to a) load GPX files to be available on both units, b) load software updates to the Data master, and c) install software for other Raymarine devices such as the Evolution AP and RS130? Or do I need to buy an A80440 for the Data master?

Q6: Has the A80440 been released?

Q7: The two Axiom units in my proposed configuration will possibly be different sizes, used for different purposes. Is it possible to configure their displays independently? (My thought is to create two different ‘user’ profiles, each profile tailored to my needs on a particular Axiom.) Is it then possible for each Axiom to be running a different profile simultaneously?

Q8: I have no need for a finder and intend to continue to use my DT800 (currently available on my STNG network). Using the DT800 for depth info, will the Navionics Sonar Logging & SonarChart Live features be available?

Q9: On the v3.0 units I saw, rudder position seemed to be displayed as a graphic bar and only on certain display pages. Is the rudder position data also available as a numeric value that be used as a data overlay or on a dashboard page?

Q10: I believe v3.2 will give me full control of my Evolution AP. Correct? Will it also allow me to continue to use my S100 remote?

Q11: I believe v3.2 will allow me to perform software updates on all of my Raymarine equipment from the Axioms. Correct? (Note: I do not see an option to download software for the RS130 via an Axiom here: http://www.raymarine.com/view/?id=13420 nor for ST converter here: http://www.raymarine.com/view/?id=3767 )

Q12: Is the ONLY difference between the Quantum models the presence of support for using a data cable rather then Wifi?

Q13: Can a Wifi-only Quantum be upgraded via Wifi?

Q14: Can I disable the internal GPS receivers and have the Axioms use the existing RS130 instead? Is there any benefit or harm to this approach?

Q15: The Lighthouse manual, in the section on Dashboards says: “You can import custom pages that have been created using approved PC based page creation software. Please refer to Raymarine Product support for more details.” What is this capability? Is it available to end-users?

Q16: Can an Axiom connect to a Quantum via Wifi and simultaneously drive the mobile apps?

Q17: I believe the Quantum is an 18”. Will I loose anything significant compared to my current analog 24” radar (model unknown)?

Q18: When connected via Wifi, must the Quantum be connected to the Data master? Or can it connect to a non-master (if that unit has a better signal path)?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom/Quantum - danderer - 10-22-17 12:28 PM
RE: Axiom/Quantum - danderer - 10-25-17, 03:39 AM
RE: Axiom/Quantum - danderer - 10-25-17, 08:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)