AXIOM with Raystar 125
|
11-18-17, 12:52 PM
Post: #1
|
|||
|
|||
AXIOM with Raystar 125
Instead of the GA-150, can I use an existing RayStar 125 GPS receiver with an AXIOM Pro MFD if I connect the RayStar 125 to the AXIOM via one of the two NMEA-0183 input ports on the AXIOM and do not use the GA-150 connection on the AXIOM?
If I do this, can I then connect the NMEA 0183 output of the AXIOM to a the NMEA-0183 input of a legacy E-120 Classic MFD so the E-120 can have a GPS source? Finally, though not directly related to the Raystar 125 question, can the AXIOM SeaTalkng/NMEA-2000 port AND the E-120 Classic SeaTalkng/NMEA-2000 port be connected to the same NMEA-2000 bus? Thanks, Jon Spain |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
AXIOM with Raystar 125 - jkspain - 11-18-17 12:52 PM
RE: AXIOM with Raystar 125 - Chuck - Raymarine - Moderator - 11-20-17, 03:25 PM
|
User(s) browsing this thread: 1 Guest(s)