The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Wind vane showing no wind speed
12-25-17, 03:53 PM (This post was last modified: 12-28-17 02:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Wind vane showing no wind speed
I removed the wind vane transducer and refitted it using some dielectric grease to stop any corrosion. Now it shows 3 dotted lines instead of wind speed. The yellow wire voltage to the screen wire is 3.5 volts which is normal. Are there any further tests I can do to check what the problem might be? It was working perfectly before.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Wind vane showing no wind speed - astroebel - 12-25-17 03:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)