[CA] Sharing between 2 MFDs

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum James,

Q1. If I use the A67 for sonar will the A68 display the charts OK?
A1. When interfaced as you have described, the a67 and a68 will share all data, features, and resources ... including cartography.

Q2. Could I display the sonar from the CP300 on the A68 and chart on the A67?
A2. Yes ... see the response to Q1.

Q3. If I also installed the CPT100 transducer I know I’m likely to get interference with the CP300.
A3. Yes ... see the response to Q1.

Q4. Can I select which sonar is active and be able to use either sonar depending on situation?
A4. Yes