Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Axiom 9" with RMK-10 and Quantum 24C

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 9" with RMK-10 and Quantum 24C
01-30-18, 04:28 PM (This post was last modified: 01-30-18 04:35 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Axiom 9" with RMK-10 and Quantum 24C
Welcome to the Raymarine Forum Bill,

While it is possible to interface an Axiom 9 to an RMK-10, doing so would require additionally installing a HS5 RayNet Network Switch and to additionally pass a RayNet Cable down the binnacle tube. Per our phone conversation, the recommended solution for this application would be an Axiom Pro 9S MFD. This Axiom Pro 9S MFD would eliminate the additional costs and complexity of installing a HS5 RayNet Network Switch, RMK-10, and RayNet(F) to RayNet (F) Cable to interface the RMK-10 to the HS-5.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Axiom 9" with RMK-10 and Quantum 24C - Chuck - Raymarine - Moderator - 01-30-18 04:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication