[CA] Getting NMEA 0183 to a VHF

[SKLemon]

Chuck: The cable and converter arrived and I went to the boat to do the installation. When I pulled the rubber plug off of the SeaTalk2 port on the E-120, I found that one of the pins was badly bent. I assume this was from the prior owner trying to insert the wrong plug. In any regard, when I tried (as gently as possible) to straighten it, it broke off. Looking at the diagram I have of the pin assignments on the plug, it looks like it is pin2, which should be the Net C (0 V Return). This is turning into an increasingly complex situation. What are my options? Thanks Stephen Lemon