The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Axiom to C80 Classic adapter plates

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Axiom to C80 Classic adapter plates
03-06-18, 05:40 PM (This post was last modified: 03-07-18 06:55 AM by Derek - Raymarine - Moderator.)
Post: #1
imrich Offline
Junior Member
**
 		Posts: 12
Joined: Sep 2016
Reputation: 0
(DG) Axiom to C80 Classic adapter plates
I've been investigating updating my boat from a C80 classic to one of the new Axiom units and was very happy to see that Raymarine is now listing an adapter plate for some of the Axiom MFDs:
http://www.raymarine.com/multifunction-d...cessories/

I see a C70 adapter plate listed, but there is no listing for my C80 (Classic) to any of the Axiom units. I'm considering an Axiom 7 or 9.

Why would Raymarine list the C70, but not the C80? Is the C70 adapter plate usable in my case if I already have a cutout for the C80 classic in my dashboard? The website doesn't have dimensions or drawings available online.

Thanks for any help!
Rich
Find all posts by this user
Thread Closed 


Messages In This Thread
(DG) Axiom to C80 Classic adapter plates - imrich - 03-06-18 05:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication