[CA] Axiom Pro Backwards Compatibility

[Chuck - Raymarine - Moderator]

Tom,

Q1. Is there a complete listing of specific transducer models which will work with the Axiom ProS and Axiom Pro RVS?
A1. Axiom Pro S MFDs feature a single transducer port permitting them to be interfaced directly to a DownVision Transducer or CPT-S Transducer (also known as an ax8/eSx8/CP100 compatible transducer).

Axiom Pro RVS MFDs feature two transducer ports. One of these ports is designed to be interfaced to a RealVisionâ„¢ 3D Transducer. This same port may instead be adapted for use with a DownVision Transducer or CPT-S Transducer (also known as an ax8/eSx8/CP100 compatible transducer). The second of these ports is designed to be interfaced directly to a CP470/CP570 compatible CHIRP transducer or adapted for use with 50kHz/200kHz transducer which was designed to be directly mated to a CP370, CP300, DSM300, DSM30, or DSM250.

Q2. Also, since the mounting plate for E120W -> Axiom Pro 12 is not yet available, will I still be able to mount the Axiom Pro 12 in the [censored] left by the E120W in some fashion?
A2. Raymarine has recently introduced the A80531 C/E120W to Axiom Pro 12 Adapter Plate.