[CA] DSM300 B164 vs Axiom & B60

[Chuck - Raymarine - Moderator]

Firewood,

Should all three of the gS-Series MFD's Ethernet (RayNet) sockets current be in use as you have specified, then the only option available would be to add a HS5 RayNet Network Switch to the system if it is your intention to:
- share cartography between the systems
- share the radar transducer between the systems
- share fishfinder sonar resources between the systems
- remotely control the Axiom MFD and the gS-Series MFD via the RMK-9/10

In such cases, I would typically recommend that each MFD, the Digital Radar Cable, the DSM300, and the RMK-9/10 each be interfaced to the HS5 RayNet Network Switch. If seeking a level of redundancy, then it would additionally be recommended that each MFD be interfaced as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone.