The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] Raystar125 Connection with Seatalk ng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Raystar125 Connection with Seatalk ng
03-16-18, 06:11 AM (This post was last modified: 03-16-18 10:45 AM by Chuck - Raymarine - Moderator.)
Post: #1
Redman Offline
Junior Member
**
 		Posts: 9
Joined: Mar 2018
Reputation: 0
[CA] Raystar125 Connection with Seatalk ng
I am planning upgrade my current Seatalk system which consists of C80, ST60, and autopilot (ST6001, S1, Raystar125), plus a non-Raymarine VHF. The VHF receives its GPS signal via its NMEA 0183 input connected to the S1 NMEA 0183 output.
I plan to keep the autopilot and integrate it with my new STng system via the ST to STng converter and connecting the ST6001 and S1 (no red power wire) to a D244 junction box. Two questions:
1. Do I keep the Raystar 125 ST wires connected to the S1 as its GPS source or will the autopilot get the GPS signal from my new Axiom MFD?
2. Will my VHF still receive a GPS signal from the S1 either thru the Raystar or MFD depending on answer to #1?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Raystar125 Connection with Seatalk ng - Redman - 03-16-18 06:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication