MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA] Bridging AIS from eS series to NMEA183


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Bridging AIS from eS series to NMEA183
03-26-18, 08:36 PM (This post was last modified: 03-28-18 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Bridging AIS from eS series to NMEA183
I have just installed 2 eS series MFDs. I have the one on my fly bridge interfaced to a AIS transceiver via NMEA183. The fly bridge MFD is interfaced to the lower station MFD with both SeatalkNG and SeatalkHS networks. I get AIS Bridged to the Lower helm station eS series MFD. I have the lower station eS series MFD interfaced to a PC. I get Depth, Heading, Speed, GPS and other information passed on to the PC but not the AIS.

Am I doing something wrong?

Would using a NMEA200 connection between the AIS and the upper station eS series MFD help get AIS to the PC?

Also, in the past I have been able to keep a library of routes on my PC and transfer them to RL80C. I can't find any provisions to transfer routes from my PC to the new eS127.

Is using SD cards to transfer routes the only option I have?

Thanks
Shay
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Bridging AIS from eS series to NMEA183 - shay - 03-26-18 08:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)